Cine projector belt for HANIMEX SR8600 NEW durable & long lasting B06

Description

Cine projector belt for HANIMEX SR8600 NEW durable & long lasting B06
This product data sheet is originally written in English.
Cine projector belt for Hanimex SR8600 NEW STOCK durable & long lasting.
This projector belt is a correct mm fit for this projector, and is made to the correct dimensions of the original manufacturers replacement belts.
We use these belts when we renovate/restore/service projectors we sell.
We have them specially made for us for this model. If a belt is too tight it may damage the bearings on your projector over time. If it is not tight enough, after a short period of time it may start to slip and the projector will run film at a slower speed making it unwatchable.
Old new stock is usually made from old materials which may well perish and deterioriate very quickly.
This belt is made from modern
Neoprene
which
is a general purpose elastomer which has a low compression set, good resilience and abrasion, and is flex cracking resistant. This will give a good long life with minimal stretching or cracking and resistance to softening and subsequent compound break down.
There are other belts available at lower prices which may not meet the same specification as ours.
We have been specialists in selling photographic equipment on ebay for over 10 years and offer a NO QUIBBLE money back guarantee if you are not 100% satisfied.
All our belts come with a 12 MONTH MONEY BACK GUARANTEE
.
.
Dispatched normally within 1 to 3 working days.
WE HAVE NO FACILITIES FOR COLLECTION
If you have less than 5 feedbacks please contact us before bidding, other wise your bid might be blocked automatically
If you have any concerns about this item after purchase please mail us
BEFORE LEAVING FEEDBACK
so that we can resolve it to your satisfaction. Thanks.
COMBINED POSTAGE - SECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE - AFTER THE MOST EXPENSIVE POSTAGE RATE - WHERE IT IS POSSIBLE TO COMBINE ITEMS. THIS IS NOT POSSIBLE FOR OVERSEAS POSTAGE AS WE PAY BY THE GRAM.
Please note P&P charges reflect not only postage but packing materails, time to pack and take to post office or courier.
All items are insured to cover loss or damage - some sellers will charge you extra for this.
Courier charge for mainland England - other areas please ask!
Europe courier charge is for MAINLAND Europe - not various Islands e.g. Cyprus, Malta etc. If unsure please ask.
We have them specially made for us for this model. If a belt is too tight it may damage the bearings on your projector over time. If it is not tight enough, after a short period of time it may start to slip and the projector will run film at a slower speed making it unwatchable. This belt is made from modern Neoprene which is a general purpose elastomer which has a low compression set, good resilience and abrasion, and is flex cracking resistant. This will give a good long life with minimal stretching or cracking and resistance to softening and subsequent compound break down. COMBINED POSTAGE - SECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE - AFTER THE MOST EXPENSIVE POSTAGE RATE - WHERE IT IS POSSIBLE TO COMBINE ITEMS. THIS IS NOT POSSIBLE FOR OVERSEAS POSTAGE AS WE PA
EAN
Does not apply
Film Format
Super 8
Brand
Hanimex
MPN
Does Not Apply
Model
SR8600
Type
Filmstrip Projector
Bundled Items
Replacement Belt